1953 - MG TD Aftermarket Heater / 12V Fan

I found a 2nd heater and thought I would make a couple of changes It is also a "Harrison" ? It was in good shape with no leaks, but had the same 6 volt motor - I found a 12V fan at a local electronics store

The fit was almost perfect...

I marked where the corners were and made two cuts at each corner and bent up the 'tabs' that that made. Couple of machine bolts through the motor and through the 'tabs' There was just enough room between the core and the motor to make this work...about a quarter of an inch! Will just pull my old one and replace it with this one....this has a hammered grey finish instead of the wrinkle black